Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, layered
Anodized black with white springs
Entirely put together

CONSISTS OF:
Four completely put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and putting together onto the design

The below thing likewise pairs really well with the thing being gone over.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Also available in Blue (RPMC0705)

This thing praises the main item right here.



These are the Pro-Line Back Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT suggest these for usage with brushless
systems

CONSISTS OF:
2 Back Split Sixer Wheels

NEEDS:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will love this product if you have the product previously stated.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/10 scale car applications
Prewired with Traxxas high current connector

CONSISTS OF:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

NEEDS:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Rated Capacity: 5000mAh
Release Rating: 25C continuous
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Port: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER disassemble or customize pack electrical wiring in any method or leak cells
NEVER place on flammable materials or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g

The below thing likewise pairs really well with the thing being gone over.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Durable nylon reinforced plastic building
Utilizes all stock hardware (for installing shocks etc.)

CONSISTS OF:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm