Traxxas Slash 4X4 Ultimate, 1/10 Short Course Truck Rtr W/ Tsm And On Bo

This is the brushless electric powered, 2.4GHz radio managed, prepared to run
1/10 scale Traxxas Slash 4x4 Ultimate LCG Short Course Racing Truck
with OBA On-Board Audio.

FEATURES:
On-Board Audio System: Duplicates the engine holler and equipment shifts of
    full-size 900 horsepower Traxxas Group trucks
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to control wheel spin and steering
    direction on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or switched off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: LGC (Low Center of Gravity) positions battery & electronics
    as deep as possible to positon weight low in the chassis, chassis
    is enhanced by integrated ribs forming a triangulated structure
Own: 4 wheel with lightweight extruded aluminum shaft
Radio: Traxxas TQi 2.4GHz high output with Traxxas Link automatic
    design recognition, telemetry enabled TSM receiver with double
    channel 1 inputs, #6510 Docking Base (not included) need to acquire,
    makes it possible for design to be tuned from an iPhone 3G/3GS/4/4S,
    or iPod Touch 2nd/3rd/4th generation (Traxxas Link App need to be
    downloaded if wanting to use an iPhone or iPod Touch)
Electronic Speed Control: Traxxas VXL-3S water resistant, with high-
    present connector, training mode, reverse and low voltage
    detection for use with TWO and THREE LiPo packs
Motor: Traxxas Velineon 3500 with ultra high temperature
    Neodymium magnets and high speed ball bearings
Stimulate Equipment: 54 tooth, 0.8 module 32 pitch
Pinion Equipment: 13 tooth
Body: Painted and trimmed
Bumpers: Front and rear, composite construction
Shocks: Traxxas GTR, tough anodized aluminum body, PTFE-covered bores,
    titanium-nitride coated shafts, and X-ring seals
Suspension: C-hub design, front and rear swaybars
Transmission: Ball bearing geared up with adjustable Torque-Control
    slipper clutch with finned aluminum alloy pressure plates
Differentials: Revo-spec sealed silicone filled planetary equipment type
Ball Bearings: Rubber sealed
Caster: Adjustable caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the vehicle in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
Tires: Mud-Terrain, with foam inserts 1.7" (43mm) wide, 4.3" (109mm)
    size
Wheels: Beadlock style split spoke to chrome center and color
    molded outer rim to simulate beadlock, 12mm hex
Steering: Double bellcrank rotating on rubber sealed bearings
    with integrated cam-type servo saver, water resistant digital high-
    torque (125 oz-in) servo, aluminum steering blocks

CONSISTS OF:
Traxxas Slash 4X4 Short Course Race Truck with On-Board Audio,
    TQi 2.4GHz Radio System w/Telemetry Sensors, Brushless ESC and
    Motor, Body, Decals, TSM and Illustrated Instruction Manual

REQUIRES:
AA Cells: 4 for transmitter
Battery: TWO LiPo with suitable battery charger, Traxxas offers a
    Completer Load, #2992 that includes a #2970 Battery charger, and a #2843X
    5800mAh 7.4V 2-cell 25C LiPo battery
LiPo Charging Bag, track and upkeep equipment

SPECS:
Vehicle-
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 7.60" (193mm)
Front and Rear Track: 11.65" (296mm) distance in between outer edges of
    wheels side-to-side
Center Ground Clearance: 2.83" (72mm)
Weight: 80.4oz (2.28kg)
Wheelbase: 12.75" (324mm)
Total Drive Ratio: 11.82 stock, out of box
    Body-
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

COMMENTS:
Offered in the following color combinations;
    Blue #1, TRAD15BB
    Black/Red #47 TRAD15LR
    Black/White, #1 TRAD15LW
    Red/Black #25, TRAD15RL
Though the Traxxas Slash is available in race replica variations with
    officially licensed ProGraphix painted bodies, we are unable to
    honor specific requests.

COMMENTS:
The ball bearings in the Traxxas ULT LGC Slash 4x4 are rubber sealed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed alternatives from Duratrax:
    Qty. Size Area Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Equipment 1 TRAC7019 DTXC1511