Traxxas Slash 4X4 Body

This is the Brief Course Racing Truck Clear Body
for the Traxxas 4x4 Slash and Slayer.

FEATURES:
Trimmed and prepared to paint
Clear protective finish on beyond body

CONSISTS OF:
Clear Brief Course Racing Truck Body with Window Masks, Sponsor and
    Body Trim Decals

REQUIRES:
Spray or brush-on polycarbonate safe paint

SPECIFICATIONS:
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

Regularly purchased with the item that you are presently reading about.



Right here is an additional item that compliments the item being gone over.



This item compliments the above gone over item.



Regularly purchased with the item that you are presently reading about.

Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

This is the A/C Powered Traxxas EZ-Peak 100W Dual Battery Battery charger
with iD Auto Battery Identification.

FEATURES:
Charges TWO and 3S LiPo batteries
5-8 cell NiMH batteries
Traxxas's iD innovation automatically sets up and optimizes charge
    settings for Traxxas iD geared up batteries
Charges two batteries at the same time at approximately 50W (4 amps) each, or
    charges single battery at 100W (8 amp) output in High-Output
    mode
Charges a NiMH and LiPo at the same time
Advanced Mode for complete manual control of charger settings
Progress bar and audible informs
Storage Mode prepares LiPo batteries for extended storage
1 Month limited guarantee through Traxxas starting at date of
    purchase

CONSISTS OF:
Traxxas EZ-Peak 100W Dual Battery Battery charger with A/C Power Cord,
    Instructions, Cooling Fan

SPECIFICATIONS:
Input Power: 100-240V/50-60Hz
Output: 100W max
Charge Current: 1-4A (double mode), 5-8A (high output mode)
Discharge Current Variety: 500mA
Current Drain for Balance Ports: 500mA
Weight: 20.3oz (575g)
Measurements: 7 x 5.4 x 2.2" (176 x 138 x 57mm)

The below item additionally sets truly well with the item being gone over.

Pinion Gear, Differential (Front), X-Maxx

This is the Pinion Gear for the Front Differential
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Hardened steel building

CONSISTS OF:
Pinion Gear for the Front Differential

This is a fantastic enhancement to the item presently being gone over.

Pinion Gear, Differential (Rear), X-Maxx

This is the Pinion Gear for the Rear Differential
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Hardened steel building

CONSISTS OF:
Pinion Gear for Rear Differential

Many others have actually purchased this item together with the item that you are presently reading about.



This is the 2.4GHz radio managed, electrical powered, prepared to run, Traxxas
Slash Short Course Race Truck.

**The included TQ 2.4GHz radio system works just with the**
**#6519 receiver and does DECLINE the Docking Base device.**

FUNCTIONS:
Chassis: Modified tub 0.08" (2mm) thick composite nylon with side
    nerf bars to impact and assistance body
Drive: Rear wheel
Motor: Titan 12 turn 550 size customized with internal cooling fan
Battery: 7-cell 3000mAh NiMH with Traxxas HD adapter, and iD
    Auto Battery Recognition that allows Traxxas iD geared up
    chargers to automatically set and enhance charge settings
Battery Battery charger: 4A DC powered quick charger
Transmission: Brushless prepared Magnum 272 metal-gear with ball
    bearings
Slipper Clutch: Revo-spec Torque-Control system
Differential: Planetary type with solidified steel equipments
Ball Bearings: Rubber sealed
Main Gear: Plastic, 48 pitch 86 tooth
Pinion Gear: Metal, 48 pitch 18 tooth
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automated
    model acknowledgment, 3-ch receiver
Radio Box: Sealed and watertight for driving through water, mud, and
    snow
Electronic Speed Control: Traxxas XL-5 watertight, with reverse and
    brake, and Traxxas high existing adapter
Shocks: Adjustable Ultra shocks with X-ring innovation, oil-filled
    plastic body
Wheels: 1.5" (38mm) broad, 2.2" (56mm) diameter 5-spoke satin surface
Tires: All surface with foam inserts 1.8" (46mm) broad, 4.25" (108mm)
    external diameter
Bumpers: Scale front and rear tube design
Body: Formed from Lexan, trimmed and prepainted
Suspension: Four wheel independent
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation
    to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind automobile

CONSISTS OF:
Traxxas Slash Short Course Race Truck w/TQ 2.4GHz radio system, ESC,
    body, motor, 7-cell 3000mAh NiMH battery, DC powered charger,
    decals and illustrated instruction manual

REQUIRES:
AA Batteries: Four for transmitter
Track devices

SPECIFICATIONS:
Vehicle-
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 8.42" (214mm)
Front and Rear Track: 11.65" (296mm) distance between external edges
    of wheels
Wheelbase: 13.2" (335mm)
Ground Clearance: 3.5" (89mm)
Weight: 76.2oz (2.16kg)
    Body-
Length: 21.3" (542mm)
Width: 11.4" (289mm)
Height: 5.3" (135mm)
Height: 5.3" (135mm)

REMARKS:
Available in the following color combinations;
    Blue #1 TRAD47BB
    Blue & Orange #25, TRAD47BN, Arie Luyendyk Jr.
    Blue & Red, TRAD47BR
    Pink, TRAD47KK
    Black & Red #9, TRAD47LR, Chad Hord
    Orange #7, TRAD47NN, Robbie Gordon
    Red & Black #25, TRAD47RL, Mark Jenkins

Though the Traxxas Slash is offered in race replica variations
with officially certified ProGraphix painted bodies, we are unable to
honor particular requests.

The ball bearings in the Traxxas Slash 2WD are rubber closed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed options from Duratrax;
    Qty. Size Area Qty Bearing Set Qty Bearing Set
4 5x11mm Steering Blocks 2 DTXC1547 2 TRAC5116
4 5x8mm Bellcrank 2 DTXC1523 2 TRAC6728
4 5x11mm R Stub Axles 2 DTXC1547 2 TRAC5116
1 5x11mm Spur Gear 1 DTXC1547 1 TRAC5116
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116