Traxxas Slash 4X4 Body

This is the Short Course Racing Truck Clear Body
for the Traxxas 4x4 Slash and Slayer.

FEATURES:
Cut and prepared to paint
Clear protective covering on beyond body

CONSISTS OF:
Clear Short Course Racing Truck Body with Window Masks, Sponsor and
    Body Trim Decals

NEEDS:
Spray or brush-on polycarbonate safe paint

SPECIFICATIONS:
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

Regularly bought with the thing that you are currently checking out.



Below is another thing that compliments the thing being reviewed.



This thing compliments the above reviewed thing.



Regularly bought with the thing that you are currently checking out.

Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

This is the Air Conditioner Powered Traxxas EZ-Peak 100W Double Battery Charger
with iD Auto Battery Identification.

FEATURES:
Charges TWO and THREE LiPo batteries
5-8 cell NiMH batteries
Traxxas's iD technology immediately configures and optimizes charge
    settings for Traxxas iD equipped batteries
Charges 2 batteries all at once at up to 50W (4 amps) each, or
    charges single battery at 100W (8 amp) output in High-Output
    mode
Charges a NiMH and LiPo at the same time
Advanced Mode for complete manual control of charger settings
Progress bar and audible informs
Storage Mode prepares LiPo batteries for prolonged storage
30 day restricted service warranty through Traxxas starting at date of
    purchase

CONSISTS OF:
Traxxas EZ-Peak 100W Double Battery Charger with Air Conditioner Power Cable,
    Instructions, Cooling Fan

SPECIFICATIONS:
Input Power: 100-240V/50-60Hz
Output: 100W max
Charge Current: 1-4A (double mode), 5-8A (high output mode)
Discharge Current Variety: 500mA
Current Drain for Balance Ports: 500mA
Weight: 20.3oz (575g)
Measurements: 7 x 5.4 x 2.2" (176 x 138 x 57mm)

The listed below thing likewise sets truly well with the thing being reviewed.

Pinion Gear, Differential (Front), X-Maxx

This is the Pinion Equipment for the Front Differential
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Hardened steel building

CONSISTS OF:
Pinion Equipment for the Front Differential

This is a great enhancement to the thing currently being reviewed.

Pinion Gear, Differential (Rear), X-Maxx

This is the Pinion Equipment for the Rear Differential
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Hardened steel building

CONSISTS OF:
Pinion Equipment for Rear Differential

Several others have actually bought this thing along with the thing that you are currently checking out.



This is the 2.4GHz radio managed, electric powered, prepared to run, Traxxas
Slash Short Course Race Truck.

**The consisted of TQ 2.4GHz radio system works only with the**
**#6519 receiver and does DECLINE the Docking Base accessory.**

FEATURES:
Chassis: Modified tub 0.08" (2mm) thick composite nylon with side
    nerf bars to effect and support body
Drive: Rear wheel
Motor: Titan 12 turn 550 size modified with internal cooling fan
Battery: 7-cell 3000mAh NiMH with Traxxas HD adapter, and iD
    Auto Battery Recognition that allows Traxxas iD equipped
    chargers to immediately set and optimize charge settings
Battery Charger: 4A DC powered fast charger
Transmission: Brushless prepared Magnum 272 metal-gear with ball
    bearings
Slipper Clutch: Revo-spec Torque-Control system
Differential: Planetary type with hardened steel equipments
Ball Bearings: Rubber sealed
Main Equipment: Plastic, 48 pitch 86 tooth
Pinion Equipment: Metal, 48 pitch 18 tooth
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automated
    design recognition, 3-ch receiver
Radio Box: Sealed and watertight for driving through water, mud, and
    snow
Electronic Speed Control: Traxxas XL-5 watertight, with reverse and
    brake, and Traxxas high existing adapter
Shocks: Adjustable Ultra shocks with X-ring technology, oil-filled
    plastic body
Wheels: 1.5" (38mm) large, 2.2" (56mm) size 5-spoke satin surface
Tires: All surface with foam inserts 1.8" (46mm) large, 4.25" (108mm)
    external size
Bumpers: Scale front and rear tube design
Body: Molded from Lexan, trimmed and prepainted
Suspension: Four wheel independent
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the automobile in relation
    to the chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind automobile

CONSISTS OF:
Traxxas Slash Short Course Race Truck w/TQ 2.4GHz radio system, ESC,
    body, motor, 7-cell 3000mAh NiMH battery, DC powered charger,
    decals and illustrated user's manual

NEEDS:
AA Batteries: Four for transmitter
Track devices

SPECIFICATIONS:
Automobile-
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 8.42" (214mm)
Front and Rear Track: 11.65" (296mm) range between external edges
    of wheels
Wheelbase: 13.2" (335mm)
Ground Clearance: 3.5" (89mm)
Weight: 76.2oz (2.16kg)
    Body-
Length: 21.3" (542mm)
Width: 11.4" (289mm)
Height: 5.3" (135mm)
Height: 5.3" (135mm)

COMMENTS:
Offered in the following color mixes;
    Blue #1 TRAD47BB
    Blue & Orange #25, TRAD47BN, Arie Luyendyk Jr.
    Blue & Red, TRAD47BR
    Pink, TRAD47KK
    Black & Red #9, TRAD47LR, Chad Hord
    Orange #7, TRAD47NN, Robbie Gordon
    Red & Black #25, TRAD47RL, Mark Jenkins

Though the Traxxas Slash is offered in race replica variations
with officially licensed ProGraphix painted bodies, we are unable to
honor specific requests.

The ball bearings in the Traxxas Slash 2WD are rubber sealed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax;
    Qty. Size Place Qty Bearing Set Qty Bearing Set
4 5x11mm Steering Blocks 2 DTXC1547 2 TRAC5116
4 5x8mm Bellcrank 2 DTXC1523 2 TRAC6728
4 5x11mm R Stub Axles 2 DTXC1547 2 TRAC5116
1 5x11mm Spur Equipment 1 DTXC1547 1 TRAC5116
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116