Traxxas Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Lowers the chassis 1" (25.4mm) for much better handling and higher
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
2|2} Nerf Bars
Battery Hold Down with Front and Rear Retainers
2|2} Front Shock Springs
Hardware and Instructions

Want an additional fantastic product to compliment the above mentioned product?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to prevent car from turning over
    throughout wheelies

CONSISTS OF:
Put together optional Wheelie Bar with mounting directions and
    hardware

NEEDS:
Securing to back of chassis

Want an additional fantastic product to compliment the above mentioned product?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the main item right here.

Chassis Low CG Black

This is the optional Low CG Conversion Chassis for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Plastic building, black in color
Designed to sit 1" (25.4mm) lower that stock chassis for much better
    handling and higher cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Low CG Conversion Chassis

This is a great enhancement to the product presently being discussed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a variety of bodies
    to be used including rally car bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

CONSISTS OF:
Front and Rear Body Mounts and Publishes with Mounting Hardware

Often purchased with the product that you are presently checking out.



This is a pair of Pro-Line Trencher X Short Course Tires for the
Front and Back of the Traxxas Slash, Slash 4x4, Slayer,
HPI Blitz, SC10 and Kyosho Ultima Vehicles.

FEATURES:
Horizontal H shaped tread for high amount of traction and side-to-
    side stability
Extra-large tall tread for high durability and durability
High density closed cell foam inserts
Medium (yellow) compound

CONSISTS OF:
2|2} Pro-Line Trencher X Tires and Foam Inserts

NEEDS:
Mounting to wheels
Tire glue (DTXR2000, DTXR2002)

SPECIFICATIONS:
Width: 1.83" (47mm)
Outer Diameter: 4.35" (110mm)
Mounting Bead: 2.2" (56mm) Outer x 3.0" (76mm) Inner

This product is frequently purchased with the above mentioned product.



This is the ST Racing Solidified Refined Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Sick of the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas car enough time, you most likely have
already experienced this problem. ST Racing Ideas Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Kit will resolve this problem
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for boost in durability, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts