Traxxas Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for better handling and greater
    catching speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
2|2} Nerf Bars
Battery Hold Down with Front and Rear Retainers
2|2} Front Shock Springs
Hardware and Directions

Want one more great thing to enhance the above stated thing?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to prevent car from turning over
    throughout wheelies

INCLUDES:
Assembled optional Wheelie Bar with installing directions and
    hardware

REQUIRES:
Securing to back of chassis

Want one more great thing to enhance the above stated thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the main item here.

Chassis Low CG Black

This is the optional Low CG Conversion Chassis for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Plastic building, black in color
Created to sit 1" (25.4mm) lower that stock chassis for better
    handling and greater cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Low CG Conversion Chassis

This is a wonderful addition to the thing currently being reviewed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a wide range of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

INCLUDES:
Front and Rear Body Installs and Publishes with Mounting Hardware

Regularly acquired with the thing that you are currently reviewing.



This is a set of Pro-Line Trencher X Short Course Tires for the
Front and Rear of the Traxxas Slash, Slash 4x4, Slayer,
HPI Blitz, SC10 and Kyosho Ultima Vehicles.

FEATURES:
Horizontal H formed tread for high amount of traction and side-to-
    side stability
Large tall tread for high durability and durability
High density closed cell foam inserts
Medium (yellow) compound

INCLUDES:
2|2} Pro-Line Trencher X Tires and Foam Inserts

REQUIRES:
Mounting to wheels
Tire glue (DTXR2000, DTXR2002)

SPECIFICATIONS:
Width: 1.83" (47mm)
Outer Size: 4.35" (110mm)
Mounting Bead: 2.2" (56mm) External x 3.0" (76mm) Inner

This thing is often acquired with the above stated thing.



This is the ST Racing Hardened Refined Steel Lock-nut Style Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins revoking the A-arms? If you have actually
been running your Traxxas car enough time, you most likely have
currently experienced this issue. ST Racing Principles Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Set will resolve this issue
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for increase in durability, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
2 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts