Traxxas Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Lowers the chassis 1" (25.4mm) for better handling and higher
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
2|2} Nerf Bars
Battery Hold Down with Front and Rear Retainers
2|2} Front Shock Springs
Hardware and Instructions

Want an additional wonderful thing to match the above pointed out thing?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to avoid vehicle from flipping over
    during wheelies

INCLUDES:
Assembled optional Wheelie Bar with mounting instructions and
    hardware

REQUIRES:
Fastening to back of chassis

Want an additional wonderful thing to match the above pointed out thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the main item here.

Chassis Low CG Black

This is the optional Low CG Conversion Chassis for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Plastic building, black in color
Created to sit 1" (25.4mm) lower that stock chassis for better
    handling and higher cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Low CG Conversion Chassis

This is a fantastic addition to the thing currently being discussed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts allow a wide range of bodies
    to be utilized consisting of rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes with Installing Hardware

Often purchased with the thing that you are currently reviewing.



This is a pair of Pro-Line Trencher X Short Course Tires for the
Front and Rear of the Traxxas Slash, Slash 4x4, Slayer,
HPI Blitz, SC10 and Kyosho Ultima Vehicles.

FEATURES:
Horizontal H formed tread for high quantity of traction and side-to-
    side stability
Oversized tall tread for high toughness and longevity
High density closed cell foam inserts
Medium (yellow) substance

INCLUDES:
2|2} Pro-Line Trencher X Tires and Foam Inserts

REQUIRES:
Installing to wheels
Tire glue (DTXR2000, DTXR2002)

SPECIFICATIONS:
Width: 1.83" (47mm)
Outer Size: 4.35" (110mm)
Installing Bead: 2.2" (56mm) External x 3.0" (76mm) Inner

This thing is regularly purchased with the above pointed out thing.



This is the ST Racing Solidified Refined Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas vehicle long enough, you most likely have
already experienced this problem. ST Racing Ideas Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Kit will solve this problem
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for boost in toughness, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts