Traxxas Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for better handling and higher
    cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Directions

Want an additional great item to compliment the above pointed out item?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to prevent car from flipping over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with installing guidelines and
    hardware

REQUIRES:
Attaching to rear of chassis

Want an additional great item to compliment the above pointed out item?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the main item here.

Chassis Low CG Black

This is the optional Low CG Conversion Chassis for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Plastic building and construction, black in color
Developed to sit 1" (25.4mm) lower that stock chassis for better
    handling and higher cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Low CG Conversion Chassis

This is a fantastic enhancement to the item presently being discussed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a variety of bodies
    to be used including rally vehicle bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

INCLUDES:
Front and Rear Body Installs and Posts with Installing Hardware

Often bought with the item that you are presently reading about.



This is a pair of Pro-Line Trencher X Short Course Tires for the
Front and Back of the Traxxas Slash, Slash 4x4, Slayer,
HPI Blitz, SC10 and Kyosho Ultima Vehicles.

FEATURES:
Horizontal H shaped tread for high quantity of traction and side-to-
    side stability
Extra-large tall tread for high toughness and longevity
High density closed cell foam inserts
Medium (yellow) compound

INCLUDES:
2 Pro-Line Trencher X Tires and Foam Inserts

REQUIRES:
Installing to wheels
Tire glue (DTXR2000, DTXR2002)

SPECIFICATIONS:
Width: 1.83" (47mm)
Outer Diameter: 4.35" (110mm)
Installing Bead: 2.2" (56mm) External x 3.0" (76mm) Inner

This item is regularly bought with the above pointed out item.



This is the ST Racing Hardened Polished Steel Lock-nut Design Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Sick of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas car enough time, you more than likely have
already experienced this problem. ST Racing Concepts Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Kit will solve this problem
at last. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat dealt with for increase in toughness, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
2 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts