Traxxas Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for much better handling and higher
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Instructions

Want an additional wonderful thing to enhance the above discussed thing?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at rear of chassis to avoid car from turning over
    during wheelies

INCLUDES:
Assembled optional Wheelie Bar with installing guidelines and
    hardware

NEEDS:
Attaching to rear of chassis

Want an additional wonderful thing to enhance the above discussed thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the main item right here.

Chassis Low CG Black

This is the optional Low CG Conversion Chassis for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Plastic building and construction, black in color
Created to sit 1" (25.4mm) lower that stock chassis for much better
    handling and higher cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Low CG Conversion Chassis

This is a great addition to the thing presently being discussed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a variety of bodies
    to be utilized including rally car bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Installs and Publishes with Mounting Hardware

Frequently purchased with the thing that you are presently checking out.



This is a pair of Pro-Line Trencher X Short Course Tires for the
Front and Rear of the Traxxas Slash, Slash 4x4, Slayer,
HPI Blitz, SC10 and Kyosho Ultima Vehicles.

FEATURES:
Horizontal H shaped tread for high quantity of traction and side-to-
    side stability
Extra-large tall tread for high durability and longevity
High density closed cell foam inserts
Medium (yellow) compound

INCLUDES:
Two Pro-Line Trencher X Tires and Foam Inserts

NEEDS:
Mounting to wheels
Tire glue (DTXR2000, DTXR2002)

SPECS:
Width: 1.83" (47mm)
Outer Diameter: 4.35" (110mm)
Mounting Bead: 2.2" (56mm) Outer x 3.0" (76mm) Inner

This thing is frequently purchased with the above discussed thing.



This is the ST Racing Solidified Polished Steel Lock-nut Design Hinge-pin Package
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas car enough time, you probably have
currently experienced this issue. ST Racing Concepts Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Package will resolve this issue
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for boost in durability, and then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts