Traxxas Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for much better handling and greater
    catching speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
2|2} Nerf Bars
Battery Hold Down with Front and Rear Retainers
2|2} Front Shock Springs
Hardware and Instructions

Want an additional fantastic thing to match the above discussed thing?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to prevent vehicle from flipping over
    throughout wheelies

INCLUDES:
Assembled optional Wheelie Bar with mounting instructions and
    hardware

REQUIRES:
Fastening to back of chassis

Want an additional fantastic thing to match the above discussed thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the main item below.

Chassis Low CG Black

This is the optional Low CG Conversion Chassis for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Plastic building and construction, black in color
Developed to sit 1" (25.4mm) lower that stock chassis for much better
    handling and greater cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Low CG Conversion Chassis

This is a fantastic enhancement to the thing currently being gone over.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a wide array of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

INCLUDES:
Front and Rear Body Installs and Posts with Mounting Hardware

Often acquired with the thing that you are currently reading about.



This is a pair of Pro-Line Trencher X Short Course Tires for the
Front and Rear of the Traxxas Slash, Slash 4x4, Slayer,
HPI Blitz, SC10 and Kyosho Ultima Vehicles.

FEATURES:
Horizontal H formed tread for high amount of traction and side-to-
    side stability
Extra-large tall tread for high resilience and durability
High density closed cell foam inserts
Medium (yellow) substance

INCLUDES:
2|2} Pro-Line Trencher X Tires and Foam Inserts

REQUIRES:
Mounting to wheels
Tire glue (DTXR2000, DTXR2002)

SPECS:
Width: 1.83" (47mm)
Outer Size: 4.35" (110mm)
Mounting Bead: 2.2" (56mm) Outer x 3.0" (76mm) Inner

This thing is frequently acquired with the above discussed thing.



This is the ST Racing Solidified Sleek Steel Lock-nut Design Hinge-pin Package
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Sick of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas vehicle long enough, you probably have
already experienced this issue. ST Racing Principles Heat Treated
Sleek Steel Lock-Nut Design Hinge-Pin Package will solve this issue
at last. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat dealt with for boost in resilience, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts