Traxxas Slash 1/16 4Wd S.C. Truck, Rtr. W/ Tq 2.4Ghz Radio, 550 Motor, 1

This is the electrical powered, 2.4GHz radio controlled, ready to run
    1/16 scale Traxxas Slash Short-Course Racing Truck.

FEATURES:
Chassis: Nylon composite building and construction 0.08" (2mm) thick bath tub type
Drive: Four wheel
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automatic
    design acknowledgment, water resistant high torque digital micro steering
    servo
Electronic Speed Control: Traxxas XL2.5 with high existing port,
    reverse, 3 driving profiles, pushbutton setup and thermal shutdown
    security
Motor: Traxxas Titan 12 turn, 550 size brushed
Spur Gear: 45 tooth
Pinion Gear: 31 tooth 48 pitch
Battery: One Traxxas Power Cell 1200mAh 6-cell NiMH w/high existing
    port, dual NiMH battery capability (additional battery (TRAC2925)
    and parallel adapter (TRAP3064) not included and need to be purchased
    individually).
Battery Charger: 2A DC Peak Detecting Quick Charger
Body: Painted and trimmed with used decals
Bumpers: Front and back, composite building and construction
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
    telescoping universal joint shafts
Transmission: Ball bearing geared up with adjustable slipper clutch
Differentials: Sealed silicone filled planetary equipment type
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
Tires: Multi terrain, with foam inserts 1" (26mm) large, 2.6" (67mm)
    size
Wheels: 5-spoke brushed chrome, 0.98" (25mm) large, 1.4" (35mm)
    size, standard size 12mm hex
Steering: Steering arm with spring loaded servo security

CONSISTS OF:
RTR Traxxas Slash Short-Course Racing Truck with TQ 2.4GHz
    radio, ESC, painted body, 6-cell battery, battery charger, additional pinion
    equipment, brushed motor and user's manual

NEEDS:
AA Cells: Four for transmitter

SPECIFICATIONS:
Automobile-
Length: 14" (356mm)
Width: 7.3" (185mm)
Height: 4.92" (125mm)
Front and Rear Track: 7.3" (185mm) distance between outer edges of
    wheels
Wheelbase: 8.1" (206mm)
Ground Clearance: 1.5" (38mm)
General Drive Ratio: 7.32:1
    Body-
Length: 13.4" (340mm)
Width: 7.1" (180mm) at rear wheels, widest point
5.7" (146mm) behind front wheels, narrowest point
Height: 3.4" (86mm)

COMMENTS:
The 1/16 scale Traxxas Slash Short-Course Truck is offered in the
    following body colors:
Black and Red, TRAC38LR Red and Black, TRAC38RL
Black and Silver, TRAC38LS Silver and Black, TRAC38SL

The ball bearings in the Traxxas Slash are rubber sealed.
Following are the stock numbers for the replacement bearings from
    Traxxas and non-rubber sealed options from Duratrax;
    Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Back Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511