Traxxas Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FEATURES:
Connect to and secures chassis and supports the front bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless steel plate

REQUIRES:
Setting up on chassis with four 3x12mm countersunk maker screws
    (not consisted of, utilize TRAC2552

REMARKS:
For the 3.3 version only. For the original T-Maxx Skidplate, order
    TRAC4037.

Often acquired with the product that you are presently reviewing.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in location
Gray in color, constructed of solidified plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Securing to skidplate and differential

REMARKS:
For the 3.3 version only.

Often acquired with the product that you are presently reviewing.

Skidplate Rr Grey

This is the Rear Plastic Skidplate for the T-Maxx 3.3.

FEATURES:
Connect to and secures chassis and supports the rear bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless steel plate

REQUIRES:
Setting up on chassis with four 3x12mm countersunk maker screws
    (not consisted of, utilize TRAC2552)

REMARKS:
For the 3.3 version only. For the original T-Maxx Skidplate, order
    TRAC4074.

You will certainly enjoy this thing if you have the thing earlier mentioned.

Steering Bellcranks E/T Maxx

    This is a Set of the Steering Bellcranks for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks.
These bellcranks bolt to the chassis and the bellcrank posts link
to the guiding turnbuckles.

FEATURES:
Changes stock guiding bellcranks.
All elements are plastic, other than for the shoulder screws which are
    steel.

INCLUDES:
2 guiding bellcranks
4 5x8x2.5mm bellcrank bushings.
Two bellcrank post spacers.
Two 3x8mm shoulder screws.
One drag link.

REQUIRES:
Connecting bellcranks to the chassis and attaching drag connect to the
    guiding turnbuckles.

Several others have acquired this product along with the product that you are presently reviewing.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Changes missing or harmed hex wheel hubs
Hubs are made from molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and positioning wheel hubs in
    recessed area of axle providers (4932).

This is a amazing enhancement to the product presently being gone over.

F & R Bumper Mounts Screws

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.
These mounts attach the bumpers to the bulkheads.

FEATURES:
Black nylon construction

INCLUDES:
One L&R Front Bumper Mount Set
One L&R Rear Bumper Mount Set
Eight 3x15mm round head maker screws

REQUIRES:
Nothing. This is a direct replacement part.

COMMENTS:
Traxxas does not offer this part in aluminum. Duratrax provides three
    different colors in aluminum, see stock numbers DTXC2725 - DTXC2732