Traxxas Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.
This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930
and supplies defense to the front differential.

FEATURES:
Skidplate is built of high effect molded black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or hard landings from jumps.
Stainless steel mounting plate supplies rigid mounting surface.

INCLUDES:
One plastic front skidplate
One stainless steel mounting plate.

REQUIRES:
Setting up on chassis with 4 3x10mm countersunk device screws
    (not consisted of, utilize TRAC3277).

The listed below item additionally pairs truly well with the item being talked about.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in place
Gray in color, built of solidified plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Attaching to skidplate and differential

REMARKS:
For the 3.3 version only.

This item is often gotten with the above mentioned item.

Skidplate Rear

This is the Replacement Back Skidplate for the Traxxas T-Maxx
4WD Radio Control Monster Truck.
This rear skidplate bolts beneath the chassis and assists to
avoid the chassis from getting scratched.

FEATURES:
Changes damaged rear skidplates.
Constructed of black plastic.

INCLUDES:
One rear skidplate.

REQUIRES:
Bolting to bottom of chassis using 3 3x10mm countersunk device
    screws (not consisted of).

REMARKS:
Maker's website is www.traxxas.com

This item is often gotten with the above mentioned item.

3 X 15Mm Counter Hex Screw (6)

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm countersunk screw is needed

INCLUDES:
6 3x15mm Traxxas Countersunk Hex Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

This item is often gotten with the above mentioned item.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel construction
Silver in color

INCLUDES:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Here is a excellent item that lots of others have purchased the same time.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Blue

These are the RPM Front Bulkheads in Blue
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all versions of the T-Maxx and E-Maxx
Nylon mix construction, blue in color
Locknuts used at the chassis and skid plate mounting holes to
    firmly lock bulkheads in place, decreasing the chance of breakage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This is a fantastic enhancement to the item presently being talked about.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel construction

INCLUDES:
Eight pins

REQUIRES:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

REMARKS:
These suffice hinge pins for the entire vehicle.