Traxxas Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (crucial #4922) and the Bulkheads crucial #4930
and supplies protection to the front differential.

FEATURES:
Skidplate is built of high impact formed black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or tough landings from jumps.
Stainless steel installing plate supplies stiff installing surface.

INCLUDES:
One plastic front skidplate
One stainless-steel installing plate.

REQUIRES:
Setting up on chassis with 4 3x10mm countersunk device screws
    (not consisted of, utilize TRAC3277).

The listed below product also pairs really well with the product being reviewed.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in location
Gray in color, built of hardened plastic

CONSISTS OF:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Securing to skidplate and differential

REMARKS:
For the 3.3 version just.

This product is frequently purchased with the above pointed out product.

Skidplate Rear

This is the Replacement Back Skidplate for the Traxxas T-Maxx
4WD Radio Control Beast Truck.
This rear skidplate bolts beneath the chassis and helps to
prevent the chassis from getting scratched.

FEATURES:
Changes broken back skidplates.
Constructed of black plastic.

INCLUDES:
One rear skidplate.

REQUIRES:
Bolting to bottom of chassis using three 3x10mm countersunk device
    screws (not consisted of).

REMARKS:
Producer's website is www.traxxas.com

This product is frequently purchased with the above pointed out product.

3 X 15Mm Counter Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo beast truck, can likewise be used in any
    application where a 3x15mm countersunk screw is required

CONSISTS OF:
6 3x15mm Traxxas Countersunk Hex Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Size: 3mm

This product is frequently purchased with the above pointed out product.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel construction
Silver in color

CONSISTS OF:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Here is a fantastic product that several others have actually bought at the very same time.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Blue

These are the RPM Front Bulkheads in Blue
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon blend construction, blue in color
Locknuts used at the chassis and skid plate installing holes to
    safely lock bulkheads in location, minimizing the chance of damage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This is a wonderful enhancement to the product presently being reviewed.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Durable steel construction

CONSISTS OF:
8 pins

NEEDS:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

REMARKS:
These suffice hinge pins for the entire automobile.