Traxxas Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.
This skidplate bolts to the Chassis (crucial #4922) and the Bulkheads crucial #4930
and supplies protection to the front differential.

FEATURES:
Skidplate is constructed of high effect molded black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or difficult landings from jumps.
Stainless steel installing plate supplies rigid installing surface.

INCLUDES:
One plastic front skidplate
One stainless steel installing plate.

REQUIRES:
Installing on chassis with 4 3x10mm countersunk maker screws
    (not consisted of, use TRAC3277).

The listed below thing additionally sets truly well with the thing being gone over.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in place
Gray in color, constructed of solidified plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Securing to skidplate and differential

COMMENTS:
For the 3.3 variation just.

This thing is frequently acquired with the above pointed out thing.

Skidplate Rear

This is the Replacement Rear Skidplate for the Traxxas T-Maxx
4WD Radio Control Monster Truck.
This rear skidplate bolts below the chassis and helps to
avoid the chassis from getting scratched.

FEATURES:
Changes damaged rear skidplates.
Constructed of black plastic.

INCLUDES:
One rear skidplate.

REQUIRES:
Bolting to bottom of chassis utilizing three 3x10mm countersunk maker
    screws (not consisted of).

COMMENTS:
Manufacturer's site is www.traxxas.com

This thing is frequently acquired with the above pointed out thing.

3 X 15Mm Counter Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo beast truck, can likewise be utilized in any
    application where a 3x15mm countersunk screw is required

INCLUDES:
6 3x15mm Traxxas Countersunk Hex Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

This thing is frequently acquired with the above pointed out thing.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel building
Silver in color

INCLUDES:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Below is a wonderful thing that numerous others have bought at the same time.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Blue

These are the RPM Front Bulkheads in Blue
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all versions of the T-Maxx and E-Maxx
Nylon mix building, blue in color
Locknuts utilized at the chassis and skid plate installing holes to
    securely lock bulkheads in place, lowering the opportunity of breakage

INCLUDES:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This is a fantastic enhancement to the thing presently being gone over.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel building

INCLUDES:
8 pins

NEEDS:
Assembly onto T/E-Maxx

SPECIFICATIONS:
Length: 65.3mm (2.57")
Size: 3.2mm (.13")

COMMENTS:
These are enough hinge pins for the whole automobile.