Traxxas Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Length of front plate: 5 5/8"
Thickness of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Thickness of rear plate: 1/8"
Width of rear plate: 2 1/8"

INCLUDES:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Want another great product to compliment the above mentioned product?

Main Chassis (Grey)

This is the Main Chassis for the Traxxas Stampede XL-5.

FUNCTIONS:
Nylon Construction
Grey in Color

INCLUDES:
One Grey Nylon Chassis

REQUIRES:
Setup into Car

This product is often gotten with the above mentioned product.

Servo Case/Gaskets For 2056 And 2075 Servos

This is the replacement Servo Case and Gasket Set for the Traxxas
2056 - TRAM2026 and 2075 (we don't stock) Servos

FUNCTIONS:
3 piece plastic case molded in blue and black color
Replaces used or broken servo cases and gaskets

INCLUDES:
One Upper Case (blue plastic)
One Middle Case (blue plastic)
One Lower Case (black plastic)
One Upper Case Gasket
One Lower Case Gasket
One Output Shaft O-Ring
Four Case Screw O-Rings

REQUIRES:
Assembly

This product is often gotten with the above mentioned product.

Front Bulkhead (Black) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in lots of Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Black nylon building

INCLUDES:
One front bulkhead

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the following automobiles:
    Rustler, Outlaw, Stampede, Nitro Rustler, SRT, Nitro Stampede.

Below is a great product that lots of others have actually purchased the same time.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in lots of Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Gray nylon building

INCLUDES:
One front bulkhead

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the following automobiles:
    Rustler, Outlaw, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

You will like this thing if you have the thing just above stated.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, enhanced nylon and is a channel-style chassis.

PACKAGE
INCLUDES: One chassis

REMARKS:
The skid plates are not included, use TRAC9023.

This product is often gotten with the above mentioned product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Often gotten with the product that you are currently reading about.

Shock Tower Rear ( R & S)

This is the stock replacement REAR shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Width at top: 4 5/16"
Width at bottom: 2 1/4"
Thickness: 1/4"
Height: 2 13/16"

INCLUDES:
(1) Rear shock tower for the Traxxas Stampede