Traxxas Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Length of front plate: 5 5/8"
Thickness of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Thickness of rear plate: 1/8"
Width of rear plate: 2 1/8"

CONSISTS OF:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Want one more great thing to enhance the above discussed thing?

Main Chassis (Grey)

This is the Main Chassis for the Traxxas Stampede XL-5.

FEATURES:
Nylon Building and construction
Grey in Color

CONSISTS OF:
One Grey Nylon Chassis

REQUIRES:
Setup into Automobile

This thing is frequently bought with the above discussed thing.

Servo Case/Gaskets For 2056 And 2075 Servos

This is the replacement Servo Case and Gasket Set for the Traxxas
2056 - TRAM2026 and 2075 (we do not stock) Servos

FEATURES:
Three piece plastic case molded in blue and black color
Changes worn or damaged servo cases and gaskets

CONSISTS OF:
One Upper Case (blue plastic)
One Middle Case (blue plastic)
One Lower Case (black plastic)
One Upper Case Gasket
One Lower Case Gasket
One Output Shaft O-Ring
4 Case Screw O-Rings

REQUIRES:
Assembly

This thing is frequently bought with the above discussed thing.

Front Bulkhead (Black) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Black nylon building and construction

CONSISTS OF:
One front bulkhead

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

COMMENTS:
This part is used on the following automobiles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede.

Here is a great thing that several others have bought at the very same time.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Gray nylon building and construction

CONSISTS OF:
One front bulkhead

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

COMMENTS:
This part is used on the following automobiles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

You will certainly enjoy this item if you have the item earlier pointed out.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, reinforced nylon and is a channel-style chassis.

PACKAGE
CONSISTS OF: One chassis

COMMENTS:
The skid plates are not consisted of, use TRAC9023.

This thing is frequently bought with the above discussed thing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
2 Front bearing (hub) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Regularly bought with the thing that you are presently reviewing.

Shock Tower Rear ( R & S)

This is the stock replacement REAR shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Width at top: 4 5/16"
Width at bottom: 2 1/4"
Thickness: 1/4"
Height: 2 13/16"

CONSISTS OF:
(1) Rear shock tower for the Traxxas Stampede