Traxxas Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Length of front plate: 5 5/8"
Thickness of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Thickness of rear plate: 1/8"
Width of rear plate: 2 1/8"

INCLUDES:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Want another excellent product to match the above pointed out product?

Main Chassis (Grey)

This is the Main Chassis for the Traxxas Stampede XL-5.

FEATURES:
Nylon Building and construction
Grey in Color

INCLUDES:
One Grey Nylon Chassis

REQUIRES:
Setup into Vehicle

This product is frequently purchased with the above pointed out product.

Servo Case/Gaskets For 2056 And 2075 Servos

This is the replacement Servo Case and Gasket Set for the Traxxas
2056 - TRAM2026 and 2075 (we don't stock) Servos

FEATURES:
Three piece plastic case formed in blue and black color
Changes worn or damaged servo cases and gaskets

INCLUDES:
One Upper Case (blue plastic)
One Middle Case (blue plastic)
One Lower Case (black plastic)
One Upper Case Gasket
One Lower Case Gasket
One Output Shaft O-Ring
4 Case Screw O-Rings

REQUIRES:
Assembly

This product is frequently purchased with the above pointed out product.

Front Bulkhead (Black) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in many Traxxas vehicles.
The front suspension arm hinge pins pass through this piece.

FEATURES:
Black nylon construction

INCLUDES:
One front bulkhead

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

COMMENTS:
This part is utilized on the list below cars:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede.

Right here is a excellent product that many others have bought at the exact same time.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in many Traxxas vehicles.
The front suspension arm hinge pins pass through this piece.

FEATURES:
Gray nylon construction

INCLUDES:
One front bulkhead

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

COMMENTS:
This part is utilized on the list below cars:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

You will certainly like this product if you have the product earlier discussed.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, strengthened nylon and is a channel-style chassis.

PACKAGE
INCLUDES: One chassis

COMMENTS:
The skid plates are not consisted of, use TRAC9023.

This product is frequently purchased with the above pointed out product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two Front bearing (center) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Frequently purchased with the product that you are presently reading about.

Shock Tower Rear ( R & S)

This is the stock replacement BACK shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Width at top: 4 5/16"
Width at bottom: 2 1/4"
Thickness: 1/4"
Height: 2 13/16"

INCLUDES:
(1) Rear shock tower for the Traxxas Stampede