Traxxas Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic building and construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

CONSISTS OF:
Front and check out skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES:
Setup on the Traxxas Revo

This item compliments the main item here.

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Back Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building and construction
Rocker shafts preinstalled

CONSISTS OF:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Setup on the Traxxas Revo

This item is regularly acquired with the above discussed item.

Bulkhead Frnt L&R Halves Diff Retainer 4 X 14Mm Bc S (4) Rev

This is the Front Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building and construction
Rocker shafts preinstalled

CONSISTS OF:
Front bulkhead halves Part #5330
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Setup on the Traxxas Revo

Want one more wonderful item to compliment the above discussed item?

Chassis, E-Revo & Summit/ Foam

This is the Chassis for the Traxxas E-Revo 4WD Beast Truck RTR

FUNCTIONS:
Nylon building and construction
Set up foam pads
Grey in color
Likewise fits the Traxxas E-Revo Brushless and Traxxas Summit with small
    modification

CONSISTS OF:
One Chassis with foam pads
Direction sheet for use with E-Revo Brushless and Summit

REQUIRES:
Setup of all other elements

SPECS:
Length: 434mm (17")
Width: 150mm (5.9")
Height: 38mm (1.5")

Want one more wonderful item to compliment the above discussed item?

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas Summit Truck RTR

FUNCTIONS:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Bulkhead (Left and Right Halves)

REQUIRES:
Setup on the car

This item compliments the above talked about item.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FUNCTIONS:
Plastic building and construction, black in color

CONSISTS OF:
Center half shafts (3 internal splined and 2 external splined)

REQUIRES:
Setup on the car

SPECS:
Diameter: 17.2mm (0.68")

Right here is one more item that compliments the item being talked about.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside diameter: 6mm
Outdoors diameter: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

Frequently acquired with the item that you are presently checking out.

Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Installs with Body Post for the Traxxas Revo.

FEATURES:
Black plastic building and construction
"TRX" logo design on front body install

CONSISTS OF:
Front and rear body mounts Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

REQUIRES:
Setup on the Traxxas Revo