Traxxas Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic building
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

CONSISTS OF:
Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES:
Installation on the Traxxas Revo

This product compliments the main item below.

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Rear Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building
Rocker shafts preinstalled

CONSISTS OF:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Installation on the Traxxas Revo

This product is regularly purchased with the above stated product.

Bulkhead Frnt L&R Halves Diff Retainer 4 X 14Mm Bc S (4) Rev

This is the Front Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building
Rocker shafts preinstalled

CONSISTS OF:
Front bulkhead cuts in half Part #5330
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Installation on the Traxxas Revo

Want an additional wonderful product to enhance the above stated product?

Chassis, E-Revo & Summit/ Foam

This is the Chassis for the Traxxas E-Revo 4WD Monster Truck RTR

FUNCTIONS:
Nylon building
Set up foam pads
Grey in color
Likewise fits the Traxxas E-Revo Brushless and Traxxas Top with minor
    adjustment

CONSISTS OF:
One Chassis with foam pads
Direction sheet for use with E-Revo Brushless and Top

REQUIRES:
Installation of all other parts

SPECIFICATIONS:
Length: 434mm (17")
Width: 150mm (5.9")
Height: 38mm (1.5")

Want an additional wonderful product to enhance the above stated product?

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Nylon building
Black in color

CONSISTS OF:
One Front Bulkhead (Left and Right Halves)

REQUIRES:
Installation on the vehicle

This product compliments the above talked about product.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FUNCTIONS:
Plastic building, black in color

CONSISTS OF:
Center half shafts (3 internal splined and two external splined)

REQUIRES:
Installation on the vehicle

SPECIFICATIONS:
Diameter: 17.2mm (0.68")

Below is an additional product that compliments the product being talked about.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outdoors diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is used in the transmission and differentials of
    the Revo.

Often purchased with the product that you are currently reading about.

Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo.

FEATURES:
Black plastic building
"TRX" logo on front body mount

CONSISTS OF:
Front and rear body installs Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

REQUIRES:
Installation on the Traxxas Revo