Traxxas Silicone Damper Oil

This is the replacement silicone damper oil that is included in a lot of the
Traxxas kits. It is approximately 30 weight oil (Traxxas does not list specific
weight), is available in a 1/2 oz (approximately) bottle and is clear.

Silicone damper (shock) oil is better than petroleum shock oil due to the fact that
silicone oil is not impacted by temperature.

PACKAGE
CONSISTS OF: One approximately 1/2 ounce bottle.

Often gotten with the thing that you are presently checking out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, also work well
with Associated aluminum shocks. Qty-4

The listed below thing also sets really well with the thing being talked about.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild package for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Want one more terrific thing to enhance the above stated thing?

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that control the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on most Traxxas nitro and electric powered vehicles.
Two hole piston moving towards higher dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

Right here is one more thing that compliments the thing being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise offered in Blue (RPMC0705)

Right here is one more thing that compliments the thing being talked about.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Back Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
2 Back Bearing Carriers
Decal

REQUIRES:
2 5x11x4mm ball bearings, DTXC1547

This thing is frequently gotten with the above stated thing.