Traxxas Silicone Damper Oil

This is the replacement silicone damper oil that is included in a number of the
Traxxas kits. It is approximately 30 weight oil (Traxxas does not list exact
weight), can be found in a 1/2 oz (approximately) bottle and is clear.

Silicone damper (shock) oil is better than petroleum shock oil since
silicone oil is not affected by temperature.

PACKAGE
CONSISTS OF: One approximately 1/2 ounce bottle.

Frequently bought with the product that you are currently reading about.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

The below product additionally pairs actually well with the product being discussed.

Shock Rebuild Big Bore/Ultra

This is a shock restore set for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Want an additional terrific product to enhance the above pointed out product?

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that control the quantity
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on many Traxxas nitro and electrical powered vehicles.
Two hole piston head for greater dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

Right here is an additional product that praises the product being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

REMARKS:
Likewise available in Blue (RPMC0705)

Right here is an additional product that praises the product being discussed.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Back Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
Two Back Bearing Carriers
Decal

REQUIRES:
Two 5x11x4mm ball bearings, DTXC1547

This product is regularly bought with the above pointed out product.