Traxxas Silicone Damper Oil

This is the replacement silicone damper oil that is included in a number of the
Traxxas kits. It is approximately 30 weight oil (Traxxas does not list precise
weight), is available in a 1/2 oz (approximately) bottle and is clear.

Silicone damper (shock) oil is much better than petroleum shock oil since
silicone oil is not impacted by temperature.

PACKAGE
INCLUDES: One approximately 1/2 ounce bottle.

Frequently bought with the product that you are presently checking out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

The below product additionally pairs actually well with the product being reviewed.

Shock Rebuild Big Bore/Ultra

This is a shock restore kit for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Want one more fantastic product to compliment the above discussed product?

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that manage the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on a lot of Traxxas nitro and electrical powered vehicles.
Two hole piston head for greater dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to install parts.

Right here is one more product that praises the product being reviewed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

REMARKS:
Also offered in Blue (RPMC0705)

Right here is one more product that praises the product being reviewed.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Back Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building
Black in color

INCLUDES:
Two Back Bearing Carriers
Decal

NEEDS:
Two 5x11x4mm ball bearings, DTXC1547

This product is regularly bought with the above discussed product.