Traxxas Silicone Damper Oil

This is the replacement silicone damper oil that is included in many of the
Traxxas kits. It is approximately 30 weight oil (Traxxas does not list precise
weight), can be found in a 1/2 oz (approximately) bottle and is clear.

Silicone damper (shock) oil is much better than petroleum shock oil since
silicone oil is not affected by temperature.

PACKAGE
INCLUDES: One approximately 1/2 ounce bottle.

Often purchased with the item that you are presently reading about.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

The below item also sets truly well with the item being discussed.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct package for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Want one more excellent item to compliment the above discussed item?

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
location over the shock body and the piston heads that manage the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on the majority of Traxxas nitro and electric powered vehicles.
Two hole piston moving towards greater dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to set up parts.

Below is one more item that praises the item being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

COMMENTS:
Also offered in Blue (RPMC0705)

Below is one more item that praises the item being discussed.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Rear Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building
Black in color

INCLUDES:
Two Rear Bearing Carriers
Decal

NEEDS:
Two 5x11x4mm ball bearings, DTXC1547

This item is regularly purchased with the above discussed item.