Traxxas Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FEATURES:
Black nylon rod ends
Steel pivot balls

CONSISTS OF:
Six nylon rod ends
Six pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECIFICATIONS:
Length: .695" (17.6mm)
Inner Diameter: .217" (5.5mm)

REMARKS:
Will work just for the Nitro T-Maxx.

This is a fantastic addition to the product presently being reviewed.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Used on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

Lots of others have actually gotten this product in addition to the product that you are presently reading about.

Antenna Tube W/ Cap, Black

This is a conventional replacement Antenna Tube with Cap from Dubro
This item can be utilized anywhere an antenna tube is required to support
a receiver antenna wire.

FEATURES:
Black plastic building and construction

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Nothing. This is a direct fit part for any boat, car, and so on that utilizes
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)

You will certainly love this thing if you have the thing just above pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on vehicle

Right here is a wonderful product that lots of others have actually bought at the exact same time.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Construction

CONSISTS OF:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECIFICATIONS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Density: 2.0 mm (0.082")

REMARKS:
None

Want another wonderful product to enhance the above stated product?

Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls utilize in the LS II race truck kit.

Kit includes: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

The listed below product likewise pairs truly well with the product being reviewed.

Shock Rebuild Big Bore/Ultra

This is a shock restore package for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This product is regularly gotten with the above stated product.

Shock Shafts Chrome Xxl (2)

This is a set of XXL shock shafts for the Traxxas shocks.

Includes: Two shock shafts

Features: solidified chrome/steel building and construction

Specifications: 2 1/8" long or 54mm
1/16" diameter or 1.5mm

Requires: Additional long shocks

Remarks: These are threaded on one end, and have the slots for e-clips on the
other.

4/16/97
AST

This is a fantastic addition to the product presently being reviewed.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
restaurant over the shock body and the piston heads that manage the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on many Traxxas nitro and electric powered vehicles.
Two hole piston moving towards higher dampening or two hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to set up parts.