Traxxas Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FEATURES:
Black steel building and construction

CONSISTS OF:
Six steel shoulder screws

SPECIFICATIONS:
Length: 12mm
Size: 3mm

Regularly purchased with the product that you are currently reading about.

Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building and construction

CONSISTS OF:
(12) Washers

SPECIFICATIONS:
Size: 3x6mm

This is a fantastic enhancement to the product currently being talked about.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Used on the Traxxas Revo beast truck, can likewise be utilized in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

The listed below product additionally pairs really well with the product being talked about.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
location over the shock body and the piston heads that manage the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on a lot of Traxxas nitro and electric powered vehicles.
Two hole piston head for higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to install parts.

Lots of others have actually purchased this product together with the product that you are currently reading about.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Lots of others have actually purchased this product together with the product that you are currently reading about.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural polished color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Regularly purchased with the product that you are currently reading about.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on vehicle

Here is a great product that lots of others have actually purchased the same time.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to hold wheelie bar arm and wheels in
    location

CONSISTS OF:
Put together optional Wheelie Bar Mount with mounting guidelines and
    hardware

NEEDS:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

This product is often purchased with the above discussed product.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct kit for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams