Traxxas Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel building

INCLUDES:
Six steel shoulder screws

SPECS:
Length: 12mm
Diameter: 3mm

Frequently bought with the product that you are currently reading about.

Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building

INCLUDES:
(12) Washers

SPECS:
Size: 3x6mm

This is a fantastic enhancement to the product currently being talked about.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo monster truck, can likewise be used in any
    application where a 3x15mm button head screw is needed

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

The below product also pairs really well with the product being talked about.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
place over the shock body and the piston heads that control the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on the majority of Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards greater dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

Numerous others have actually bought this product along with the product that you are currently reading about.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Numerous others have actually bought this product along with the product that you are currently reading about.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural refined color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

Frequently bought with the product that you are currently reading about.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on vehicle

Here is a fantastic product that lots of others have actually purchased the same time.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to hold wheelie bar arm and wheels in
    place

INCLUDES:
Assembled optional Wheelie Bar Mount with mounting guidelines and
    hardware

REQUIRES:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

This product is often bought with the above discussed product.

Shock Rebuild Big Bore/Ultra

This is a shock restore kit for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams