Traxxas Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel building and construction

CONSISTS OF:
Six steel shoulder screws

SPECS:
Length: 12mm
Diameter: 3mm

Often bought with the product that you are presently reviewing.

Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building and construction

CONSISTS OF:
(12) Washers

SPECS:
Size: 3x6mm

This is a fantastic addition to the product presently being discussed.

3 X 15Mm Button Hex Screw (6)

This is a plan of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Utilized on the Traxxas Revo monster truck, can also be used in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

The below product additionally sets actually well with the product being discussed.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that control the quantity
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on most Traxxas nitro and electric powered vehicles.
Two hole piston head for higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

Numerous others have actually bought this product in addition to the product that you are presently reviewing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Numerous others have actually bought this product in addition to the product that you are presently reviewing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural refined color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Often bought with the product that you are presently reviewing.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

Below is a terrific product that several others have actually bought at the very same time.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to hold wheelie bar arm and wheels in
    location

CONSISTS OF:
Assembled optional Wheelie Bar Mount with installing directions and
    hardware

REQUIRES:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

This product is regularly bought with the above pointed out product.

Shock Rebuild Big Bore/Ultra

This is a shock restore set for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams