Traxxas Attachment Screws

    This is a Plan of 3x12x5mm Shoulder Screws for lots of
Traxxas Vehicles.

FEATURES:
Black steel building and construction
Screws are half-threaded/half-smooth
Phillips head

CONSISTS OF:
Six 3x12x5mm shoulder screws

SPECS:
Length: 12mm (.47")
Size: 3mm (.12")
Thread Length: 5mm (.20")

Get this item to enhance the one you read about.

Shock Tower

This is the Shock Tower for the all versions of the Traxxas T-Maxx.
This is for rectangular body posts.

FEATURES:
Plastic building and construction

CONSISTS OF:
(1) Shock Tower

NEEDS:
Setup

SPECS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Thickness: 0.323" (8.2mm)

Below is a fantastic item that several others have bought at the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Regularly gotten with the item that you are currently reading about.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located in between the bumper mounts.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Bulkhead Cross Braces
8 3x25mm round head screws

NEEDS:
Setup onto and E-Maxx.

SPECS:
Installing holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Lots of others have gotten this item along with the item that you are currently reading about.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are constructed of chrome-plated steel and utilized to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins

This item is often gotten with the above stated item.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (center) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Regularly gotten with the item that you are currently reading about.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building and construction anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
4 4mm Flanged Nylon Locknuts

NEEDS:
6mm nut driver

SPECS:
Hole Size: 4mm
Hex Size: 6mm

This is a wonderful addition to the item currently being gone over.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal building and construction
Black in color

CONSISTS OF:
Six 4 x 12mm Countersunk Flathead Hex Screws

NEEDS:
Setup on the car

The below item likewise pairs truly well with the item being gone over.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made from stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97