Traxxas Shock Tower

This is the Shock Tower for the all variations of the Traxxas T-Maxx.
This is for rectangle-shaped body posts.

FEATURES:
Plastic construction

INCLUDES:
(1) Shock Tower

NEEDS:
Installation

SPECIFICATIONS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Thickness: 0.323" (8.2mm)

Often gotten with the thing that you are presently checking out.

Body Mount Posts

This is the Front Body Mount Posts, Back Body Mount and 4 Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and install connect the body to the
    chassis

INCLUDES:
2 Front Body Mount Posts Back Body Mount and 4 2.5 x 17mm screw
    pins

NEEDS:
Installing on chassis

Want an additional wonderful thing to match the above pointed out thing?

Attachment Screws

    This is a Plan of 3x12x5mm Shoulder Screws for many
Traxxas Vehicles.

FEATURES:
Black steel construction
Screws are half-threaded/half-smooth
Phillips head

INCLUDES:
Six 3x12x5mm shoulder screws

SPECIFICATIONS:
Length: 12mm (.47")
Diameter: 3mm (.12")
Thread Length: 5mm (.20")

Want an additional wonderful thing to match the above pointed out thing?

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Fully put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping areas from dirt
Attaches to the differential with one screw pin
Works on the front or back, right or left of vehicle

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Instruction sheet

NEEDS:
Installing on chassis

Here is a wonderful thing that numerous others have purchased the exact same time.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located in in between the bumper mounts.

FEATURES:
Black nylon construction

INCLUDES:
2 Bulkhead Cross Braces
Eight 3x25mm round head screws

NEEDS:
Installation onto and E-Maxx.

SPECIFICATIONS:
Installing holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm