Traxxas Shock Tower

This is the Shock Tower for the all variations of the Traxxas T-Maxx.
This is for rectangular body posts.

FEATURES:
Plastic construction

INCLUDES:
(1) Shock Tower

NEEDS:
Setup

SPECIFICATIONS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Density: 0.323" (8.2mm)

Often purchased with the product that you are currently reading about.

Body Mount Posts

This is the Front Body Mount Posts, Back Body Mount and four Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and mount attach the body to the
    chassis

INCLUDES:
Two Front Body Mount Posts Back Body Mount and four 2.5 x 17mm screw
    pins

NEEDS:
Installing on chassis

Want one more fantastic product to enhance the above mentioned product?

Attachment Screws

    This is a Plan of 3x12x5mm Shoulder Screws for many
Traxxas Vehicles.

FEATURES:
Black steel construction
Screws are half-threaded/half-smooth
Phillips head

INCLUDES:
6 3x12x5mm shoulder screws

SPECIFICATIONS:
Length: 12mm (.47")
Diameter: 3mm (.12")
Thread Length: 5mm (.20")

Want one more fantastic product to enhance the above mentioned product?

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Completely assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Attaches to the differential with one screw pin
Works on the front or rear, right or left of vehicle

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Direction sheet

NEEDS:
Installing on chassis

Right here is a fantastic product that many others have purchased the very same time.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located in between the bumper mounts.

FEATURES:
Black nylon construction

INCLUDES:
Two Bulkhead Cross Braces
8 3x25mm round head screws

NEEDS:
Setup onto and E-Maxx.

SPECIFICATIONS:
Installing holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm