Traxxas Shock Rebuild Big Bore/Ultra

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

You will certainly enjoy this thing if you have the thing just above discussed.

Shck Shfts Hardened

These are the Optional Titanium Nitride coated
XX-long Shock Shafts from Traxxas.

FEATURES:
Functions a Titanium Nitride finish for increased durability.
These shock shafts have a Gold color finish.

INCLUDES:
2 XX-Long Shock Shafts

NEEDS:
2 XX-long Traxxas shocks

SPECIFICATIONS:
Length- 2.1"(52.8mm)
Size- 0.1"(3mm)

Want one more terrific item to match the above mentioned item?

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

NEEDS:
Other shock components

SPECIFICATIONS:
Size Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Lots of others have actually acquired this item together with the item that you are presently checking out.

40Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in heat or thicken up in cold weather condition

CONSISTS OF:
One bottle of silicone oil

SPECIFICATIONS:
40wt (the higher the weight number the thicker the oil)
2 oz. bottle

Get this item to improve the one you are reading about.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL variation of the Rustler
or Stampede.

This item is regularly acquired with the above mentioned item.

Shock Shafts Long Nitro Rustler (2)

There are the Long Shock Shafts for the Traxxas Nitro Rustler.

FEATURES:
Solidified steel and titanium nitride layered (Brass color)

CONSISTS OF:
2 shafts

NEEDS:
Setup in shock

SPECIFICATIONS:
Size: 3mm (0.118")_
Length: 47 mm (1.85")_
Thread: 3mm (0.118")

COMMENTS:
Uses 3mm e-clips (DTXQ0524)

Often acquired with the item that you are presently checking out.

32.5Wt Silicone Shock Oil, 2Oz

This is the Factory Group 32.5WT Shock Fluid from Associated.
This can be used in any application that needs shock fluid.

FEATURES:
Custom-made blend silicone
Clear liquid
Bottle consists of 2oz (59cc) of fluid

CONSISTS OF:
One 2oz (59cc) bottle of 32.5wt shock fluid

Often acquired with the item that you are presently checking out.

50Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED Silicone Shock Oil used with oil shocks.

FEATURES:
100% pure Silicone Oil
Will not thin in heat or thicken in cold weather

CONSISTS OF:
One bottle of Silicone Oil

SPECIFICATIONS:
50wt (the higher the weight number the thicker the oil)
2oz bottle

You will certainly enjoy this thing if you have the thing just above discussed.



This is a 2oz bottle of Racers Edge 50wt silicone shock oil used with oil filled shocks. Racers Edge shock oil is made from 100% pure silicone oil and will not thin out in heat or thicken up in cold weather. The higher the weight variety of the oil, the more damping your shocks will have when riding over bumps.

It is not recommened to blend oils of various brand names, as the thickness of oils from various vendors of the same weight rating might vary! Adhere to one brand name for all your oils, so that you will have a reproducible setup if you need to rebuild your shocks.