Traxxas Large Servo Saver

This is a large servo saver that can be utilized in Traxxas vehicles or any automobile that
needs a large design servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that permit you to install the saver
on a lot of popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the steering linkages.

Below is a excellent item that lots of others have purchased the exact same time.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Also called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

This item compliments the above discussed item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the main item right here.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

INCLUDES:
One left and right steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

This item compliments the main item right here.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a spending plan friendly water resistant digital servo with great torque for lots of applications. This brushed servo features a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge technology with incredibly high 12-bit (4096) resolution and metal gears for your greater accuracy when dodging puddles. This is a fantastic upgrade if your seeking to drive your RC car in any condition...rain, sleet, or snow.

Features:

• Integrates cutting edge
  technology with incredibly high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Very strong metal gears make sure long-life and durability.
• Our servos are completely green ? from materials to production, these servos are ecologically friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This item compliments the above discussed item.



This is a pack of 4 1.5V AA Alkaline Batteries from Duratrax.

FEATURES:
Suitable for RC and home applications
Mercury, cadmium, and lead free

INCLUDES:
4 1.5V Onyx AA Alkaline Batteries

The listed below item additionally sets truly well with the item being discussed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Secures the Chassis.

FEATURES:
Durable Plastic Building
Black in Color

INCLUDES:
One Bumper
One Team RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162