Traxxas Servo Gear Set #2070/2075

This is the replacement Equipment Set for the 2070 & 2075 Servo.

FEATURES:
Complete gear set for the Traxxas 2070 (TRAM2070) or 2075 servo

INCLUDES:
Four servo equipments and bearings and instruction sheet

NEEDS:
Installation on the 2070 or 2075 Traxxas servo

The below thing additionally pairs truly well with the thing being reviewed.

Universal Servo Grease

This is for usage with all producers' servo gear sets.
To usage, merely take apart servo, throughly clean all old grease off equipments, and
use new grease sparingly throughout reassembly.
The grease (.1 oz) can be found in a little toothpaste-like metal tube.

DEE
8.Oct.97

Regularly bought with the thing that you are presently reading about.

Large Servo Saver

This is a large servo saver that can be used in Traxxas vehicles or any automobile that
requires a large style servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that enable you to install the saver
on a lot of popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the guiding linkages.

Get this thing to improve the one you are reading around.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, enhanced nylon and is a channel-style chassis.

PACKAGE
INCLUDES: One chassis

COMMENTS:
The skid plates are not consisted of, use TRAC9023.

Right here is a fantastic thing that numerous others have actually bought at the exact same time.

Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made of black molded nylon
For the Traxxas Stampede

SPECS:
Length of front plate: 5 5/8"
Thickness of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Thickness of rear plate: 1/8"
Width of rear plate: 2 1/8"

INCLUDES:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Regularly bought with the thing that you are presently reading about.

Box, Receiver For Stmpd, Rstlr, Bandt

This is the Receiver Box for usage on the
Traxxas Stampede, Rustler, and Outlaw Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Receiver Box
One Rubber Seal
Foam Padding
Two 2.5x8mm Cap Head Screws
Two 3x10mm Cap Head Screws
Two 2.5x10mm Cap Head Screws
One Tube of Grease
Instruction sheet

NEEDS:
Installation on the car

SPECS:
Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")

Several others have actually bought this thing in addition to the thing that you are presently reading about.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building and construction
Black in color

INCLUDES:
One left caster block
One right caster block

NEEDS:
Installation on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

This thing is regularly bought with the above mentioned thing.

Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building and construction
Black in color

INCLUDES:
Two steering obstructs

NEEDS:
Installation on guiding assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")