Traxxas Servo Digital Hightorque Bb Wa

This is the Digital High Torque Servo for the Traxxas
E-Revo RTR and the Traxxas Slash

FEATURES:
Plastic blue two piece water resistant case

CONSISTS OF:
One Digital High Torque Servo with J design connector

NEEDS:
Installing into car

SPECIFICATIONS:
Length: 41mm (1.6")
Width: 20mm (0.79")
Height: 42.3mm (1.67")
Torque: 125 oz-in
Speed: 0.16 sec @ 60°

Many others have purchased this item along with the item that you are currently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly like this thing if you have the thing above stated.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one needed).

Want another fantastic item to match the above pointed out item?

Antenna Tube W/ Cap, Black

This is a standard replacement Antenna Tube with Cap from Dubro
This product can be utilized anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Black plastic building

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Nothing. This is a direct fit part for any boat, automobile, etc. that uses
    a standard size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)

Want another fantastic item to match the above pointed out item?

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

CONSISTS OF:
Two hex centers
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These centers could be utilized with other automobiles making use of the very same
    pin/hex design. These centers Will Not work on the T-Maxx or E-Maxx.