Traxxas Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are constructed of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
2 3mm x 46mm screw pins
2 3mm x 40mm screw pins
2 3mm x 29mm screw pins
2 2mm x 27mm screw pins
2 2mm x 24mm screw pins

This item praises the main item here.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

You will like this thing if you have the thing previously pointed out.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
guiding knuckles attach to.

FEATURES:
Nylon building, black in color
Stamped right and left to guarantee proper setup

INCLUDES:
2 RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and guiding knuckles

Get this item to enhance the one you read about.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

REQUIRES:
Installing in vehicle

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

Want another fantastic item to match the above pointed out item?

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in lots of Traxxas vehicles.
The front suspension arm hinge pins pass through this piece.

FEATURES:
Gray nylon building

INCLUDES:
One front bulkhead

REQUIRES:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the following automobiles:
    Rustler, Outlaw, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

Frequently gotten with the item that you are presently reviewing.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

INCLUDES:
One left and ideal steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

Right here is another item that praises the item being gone over.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

INCLUDES:
2 Front bearing (center) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.