Traxxas Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins

This product praises the main item right here.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Likewise called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

You will enjoy this product if you have the product just above stated.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
guiding knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated insure appropriate setup

INCLUDES:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles

Get this product to enhance the one you are reading about.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with connectors

NEEDS:
Installing in automobile

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

Want one more wonderful product to enhance the above pointed out product?

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in numerous Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Gray nylon construction

INCLUDES:
One front bulkhead

NEEDS:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the list below cars:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

Regularly purchased with the product that you are presently reading about.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

INCLUDES:
One left and best steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Below is one more product that praises the product being discussed.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two Front bearing (hub) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.