Traxxas Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Regularly bought with the product that you are presently reading about.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel building and construction

CONSISTS OF:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

NEEDS:
Setup on the Rustler, Stampede or Outlaw

REMARKS:
For a total suspension pin set order TRAC4940

Lots of others have actually bought this product together with the product that you are presently reading about.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon building and construction

CONSISTS OF:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

NEEDS:
Other shock components

SPECS:
Diameter Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Lots of others have actually bought this product together with the product that you are presently reading about.

Silicone Damper Oil

This is the replacement silicone damper oil that is consisted of in a lot of the
Traxxas sets. It is approximately 30 weight oil (Traxxas does not list precise
weight), is available in a 1/2 oz (approximately) bottle and is clear.

Silicone damper (shock) oil is much better than petroleum shock oil due to the fact that
silicone oil is not affected by temperature.

PACKAGE
CONSISTS OF: One approximately 1/2 ounce bottle.

This product praises the main item here.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

This product praises the main item here.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for designs with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

The below product also pairs really well with the product being reviewed.

Self-Tapping Screw Spirit

    This is a self tapping screw set for the Traxxas Spirit.

FEATURES:
Black, steel building and construction
Phillips drive insert
Self tapping

CONSISTS OF:
3x15mm (10)
3x8mm (5)
2x6mm (3)
3x18mm (10)
2.6x14mm (5)
3x12 mm (3)
3x10mm (14)
2.6x10mm (8)
3x8mm (3)

REMARKS:
For the total Spirit screw set, TRAC1250 is likewise required.

This product is frequently bought with the above mentioned product.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors size: 7mm

This product is frequently bought with the above mentioned product.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
Two 3mm x 46mm screw pins
Two 3mm x 40mm screw pins
Two 3mm x 29mm screw pins
Two 2mm x 27mm screw pins
Two 2mm x 24mm screw pins