Traxxas Rotor Blade Set, Black (2) (With Screws) - Aton

Model: Traxxas 7926
Dist. #: TRA7926 SKU: TRA7926

Be the first to review this product. (Write Review)

Out of stock

Price:

$5.99

This item will earn you 6 reward point(s).
6 points = $0.12 off your next order. Learn More

Updated on Apr 18, 2024 03:25:53 AM

Rotor Blade Set Black (2)(w/Screws) Aton...

This product compliments the above discussed product.

5000Mah 11.1V 3-Cell 20C Lipo Battery W/ Id Plug

This is the Traxxas 11.1V THREE 5000mAh 20C LiPo Battery.

FEATURES:
Standard replacement battery for the Traxxas Aton Plus, optional for
the Aton
Likewise suitable with the Traxxas 1/10 scale VXL designs (Outlaw VXL,
Rustler VXL, Stampede VXL, Stampede 4x4 VXL, Slash VXL,
Slash 4x4 VXL and Rally VXL equipped with stock gear ratio and
tires
iD Automobile Battery Identification allows Traxxas iD equipped chargers to
automatically set and enhance charge settings for particular battery

CONSISTS OF:
11.1V THREE 5000mAh 20C LiPo Battery with iD Port and Integrated
Balance Plug

NEEDS:
LiPo suitable battery charger
Charging Bag

SPECIFICATIONS:
Length: 5.3" (134mm)
Width: 1.7" (42.5mm)
Thickness: 1.1" (27.8mm)
Weight: 12.5oz (355g)
Constant Discharge: 20C
Wire Lead: 12AWG Maxx Cable

REMARKS:
Not recommended for any Traxxas cars other than the ones noted
above.

ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer or Battery charger with Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 3C
NEVER EVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER take apart or modify pack circuitry in any method or leak cells
NEVER put on combustible materials or leave ignored during
charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts

This product compliments the main item here.

Rotor Blade Set, Green (2) (With Screws) - Aton

This is the Rotor Blade Embed in Green for the Traxxas Aton Quadcopter.

FEATURES:
Fits the Traxxas Aton and Aton Plus
Stamped "A" and "B" to guarantee correct setup
Formed plastic construction

CONSISTS OF:
One each; Clockwise Rotating "A" Stamped Propeller
Counterclockwise Rotating "B" Stamped Propeller

You will love this thing if you have the thing previously discussed.

Landing Gear, Tall - Aton