Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit suches as: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Often acquired with the item that you are currently checking out.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for easy adjustment.
2- 2x6,2.5mm thick aluminum spacers

Remark: The spacers are for spacing the ball end far from the transmission
bulkhead.

You will certainly love this thing if you have the thing above pointed out.



This is the Motor for the Latrax Rally Automobile from Traxxas.

FEATURES:
Stock replacement motor

CONSISTS OF:
28 turn 370 size Brushed Motor

This item is regularly acquired with the above mentioned item.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with connectors

NEEDS:
Installing in vehicle

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

You will certainly love this thing if you have the thing above pointed out.

Caster Blocks 30 Deg

This is a set of optional caster obstructs for the TRAXXAS TRX-3 2wd electrical off
roadway racing buggy.

FEATURES:
Made of white nylon
For 30° caster

CONSISTS OF:
One left caster block
One right caster block

REMARKS:
These castor obstructs install onto the front A-arms and the steering
blocks install onto the caster obstructs.

Below is an additional item that compliments the item being discussed.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FUNCTIONS:
Black nylon rod ends
Steel pivot balls

CONSISTS OF:
Six nylon rod ends
Six pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECIFICATIONS:
Length: .695" (17.6mm)
Inner Diameter: .217" (5.5mm)

REMARKS:
Will work just for the Nitro T-Maxx.

Below is a great item that many others have purchased the very same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Height: 2 3/4"
Density: 1/4"
Width at base: 2 3/4"
Width at top: 2"

CONSISTS OF:
(1) Front shock tower for the Traxxas Stampede

Often acquired with the item that you are currently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One left and right steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Below is a great item that many others have purchased the very same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel construction (silver color)

CONSISTS OF:
Two (2) turnbuckles

NEEDS:
Rod ends (TRAC4742)

SPECIFICATIONS:
Length: 82.4mm
Diameter: 3mm

You will certainly love this thing if you have the thing above pointed out.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are utilized on the rear end of the truck(rear hubs).

Suches as: 2- 62mm turnbuckles with adjusting nuts.