Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit consists of: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Regularly purchased with the item that you are currently checking out.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for easy adjustment.
2- 2x6,2.5mm thick aluminum spacers

Remark: The spacers are for spacing the ball end away from the transmission
bulkhead.

You will certainly enjoy this item if you have the item above mentioned.



This is the Motor for the Latrax Rally Car from Traxxas.

FEATURES:
Stock replacement motor

INCLUDES:
28 turn 370 size Brushed Motor

This item is frequently purchased with the above pointed out item.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

REQUIRES:
Setting up in vehicle

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Suching as Shaft: 3.2" (81mm)
Length Not Suching as Shaft: 2.3" (57.5mm)
Specifications such as RPM are not provided

You will certainly enjoy this item if you have the item above mentioned.

Caster Blocks 30 Deg

This is a set of optional caster obstructs for the TRAXXAS TRX-3 2wd electrical off
roadway racing buggy.

FEATURES:
Made of white nylon
For 30° caster

INCLUDES:
One left caster block
One right caster block

COMMENTS:
These castor obstructs install onto the front A-arms and the steering
blocks install onto the caster obstructs.

Below is an additional item that compliments the item being reviewed.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FEATURES:
Black nylon rod ends
Steel pivot balls

INCLUDES:
Six nylon rod ends
Six pivot balls

REQUIRES:
Turnbuckles: TRAC6338

SPECIFICATIONS:
Length: .695" (17.6mm)
Inner Diameter: .217" (5.5mm)

COMMENTS:
Will work only for the Nitro T-Maxx.

Below is a excellent item that several others have bought at the same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

INCLUDES:
(1) Front shock tower for the Traxxas Stampede

Regularly purchased with the item that you are currently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

INCLUDES:
One left and right steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

Below is a excellent item that several others have bought at the same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel construction (silver color)

INCLUDES:
2 (2) turnbuckles

REQUIRES:
Rod ends (TRAC4742)

SPECIFICATIONS:
Length: 82.4mm
Diameter: 3mm

You will certainly enjoy this item if you have the item above mentioned.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are used on the rear end of the truck(rear hubs).

Consists of: 2- 62mm turnbuckles with adjusting nuts.