Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls utilize in the LS II race truck kit.

Kit consists of: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Frequently purchased with the item that you are currently reviewing.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for simple modification.
2- 2x6,2.5mm thick aluminum spacers

Remark: The spacers are for spacing the ball end far from the transmission
bulkhead.

You will certainly like this product if you have the product just above pointed out.



This is the Motor for the Latrax Rally Car from Traxxas.

FEATURES:
Stock replacement motor

SUCHES AS:
28 turn 370 size Brushed Motor

This item is frequently purchased with the above pointed out item.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

SUCHES AS:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Setting up in automobile

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

You will certainly like this product if you have the product just above pointed out.

Caster Blocks 30 Deg

This is a set of optional caster obstructs for the TRAXXAS TRX-3 2wd electric off
road racing buggy.

FEATURES:
Made from white nylon
For 30° caster

SUCHES AS:
One left caster block
One right caster block

COMMENTS:
These castor obstructs install onto the front A-arms and the steering
blocks install onto the caster obstructs.

Right here is an additional item that compliments the item being talked about.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FUNCTIONS:
Black nylon rod ends
Steel pivot balls

SUCHES AS:
6 nylon rod ends
6 pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECS:
Length: .695" (17.6mm)
Inner Size: .217" (5.5mm)

COMMENTS:
Will work only for the Nitro T-Maxx.

Right here is a great item that several others have actually bought at the same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

SUCHES AS:
(1) Front shock tower for the Traxxas Stampede

Frequently purchased with the item that you are currently reviewing.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

SUCHES AS:
One left and ideal steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Right here is a great item that several others have actually bought at the same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel building (silver color)

SUCHES AS:
2 (2) turnbuckles

NEEDS:
Rod ends (TRAC4742)

SPECS:
Length: 82.4mm
Size: 3mm

You will certainly like this product if you have the product just above pointed out.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are used on the rear end of the truck(rear centers).

Includes: 2- 62mm turnbuckles with changing nuts.