Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit consists of: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Regularly acquired with the item that you are presently reviewing.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for simple adjustment.
2- 2x6,2.5mm thick aluminum spacers

Remark: The spacers are for spacing the ball end far from the transmission
bulkhead.

You will like this thing if you have the thing earlier mentioned.



This is the Motor for the Latrax Rally Vehicle from Traxxas.

FEATURES:
Stock replacement motor

CONSISTS OF:
28 turn 370 size Brushed Motor

This item is frequently acquired with the above stated item.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with adapters

NEEDS:
Setting up in vehicle

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Suching as Shaft: 3.2" (81mm)
Length Not Suching as Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

You will like this thing if you have the thing earlier mentioned.

Caster Blocks 30 Deg

This is a set of optional caster blocks for the TRAXXAS TRX-3 2wd electrical off
roadway racing buggy.

FEATURES:
Made of white nylon
For 30° caster

CONSISTS OF:
One left caster block
One right caster block

REMARKS:
These castor blocks install onto the front A-arms and the steering
blocks install onto the caster blocks.

Right here is one more item that praises the item being gone over.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FUNCTIONS:
Black nylon rod ends
Steel pivot balls

CONSISTS OF:
6 nylon rod ends
6 pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECIFICATIONS:
Length: .695" (17.6mm)
Inner Diameter: .217" (5.5mm)

REMARKS:
Will work just for the Nitro T-Maxx.

Right here is a fantastic item that many others have purchased the exact same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

CONSISTS OF:
(1) Front shock tower for the Traxxas Stampede

Regularly acquired with the item that you are presently reviewing.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and right steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Right here is a fantastic item that many others have purchased the exact same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel building (silver color)

CONSISTS OF:
2 (2) turnbuckles

NEEDS:
Rod ends (TRAC4742)

SPECIFICATIONS:
Length: 82.4mm
Diameter: 3mm

You will like this thing if you have the thing earlier mentioned.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are utilized on the rear end of the truck(rear centers).

Consists of: 2- 62mm turnbuckles with changing nuts.