Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit includes: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Frequently purchased with the thing that you are presently checking out.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for easy change.
2- 2x6,2.5mm thick aluminum spacers

Comment: The spacers are for spacing the ball end away from the transmission
bulkhead.

You will certainly like this product if you have the product previously pointed out.



This is the Motor for the Latrax Rally Automobile from Traxxas.

FEATURES:
Stock replacement motor

INCLUDES:
28 turn 370 size Brushed Motor

This thing is regularly purchased with the above pointed out thing.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with connectors

NEEDS:
Setting up in automobile

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered

You will certainly like this product if you have the product previously pointed out.

Caster Blocks 30 Deg

This is a set of optional caster blocks for the TRAXXAS TRX-3 2wd electrical off
road racing buggy.

FEATURES:
Made of white nylon
For 30° caster

INCLUDES:
One left caster block
One right caster block

REMARKS:
These castor blocks install onto the front A-arms and the steering
blocks install onto the caster blocks.

Here is one more thing that compliments the thing being gone over.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FEATURES:
Black nylon rod ends
Steel pivot balls

INCLUDES:
6 nylon rod ends
6 pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECS:
Length: .695" (17.6mm)
Inner Size: .217" (5.5mm)

REMARKS:
Will work only for the Nitro T-Maxx.

Here is a terrific thing that numerous others have actually bought at the exact same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

INCLUDES:
(1) Front shock tower for the Traxxas Stampede

Frequently purchased with the thing that you are presently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building and construction
Black in color

INCLUDES:
One left and right steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Here is a terrific thing that numerous others have actually bought at the exact same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel building and construction (silver color)

INCLUDES:
Two (2) turnbuckles

NEEDS:
Rod ends (TRAC4742)

SPECS:
Length: 82.4mm
Size: 3mm

You will certainly like this product if you have the product previously pointed out.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are utilized on the rear end of the truck(rear centers).

Suches as: 2- 62mm turnbuckles with adjusting nuts.