Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls utilize in the LS II race truck kit.

Kit suches as: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Regularly gotten with the thing that you are currently checking out.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for simple change.
2- 2x6,2.5mm thick aluminum spacers

Remark: The spacers are for spacing the ball end away from the transmission
bulkhead.

You will certainly enjoy this thing if you have the thing earlier stated.



This is the Motor for the Latrax Rally Car from Traxxas.

FEATURES:
Stock replacement motor

CONSISTS OF:
28 turn 370 size Brushed Motor

This thing is often gotten with the above discussed thing.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with connectors

REQUIRES:
Setting up in automobile

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not offered

You will certainly enjoy this thing if you have the thing earlier stated.

Caster Blocks 30 Deg

This is a set of optional caster obstructs for the TRAXXAS TRX-3 2wd electric off
roadway racing buggy.

FEATURES:
Made from white nylon
For 30° caster

CONSISTS OF:
One left caster block
One right caster block

COMMENTS:
These castor obstructs mount onto the front A-arms and the steering
blocks mount onto the caster obstructs.

Right here is one more thing that praises the thing being reviewed.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FEATURES:
Black nylon rod ends
Steel pivot balls

CONSISTS OF:
6 nylon rod ends
6 pivot balls

REQUIRES:
Turnbuckles: TRAC6338

SPECIFICATIONS:
Length: .695" (17.6mm)
Inner Size: .217" (5.5mm)

COMMENTS:
Will work just for the Nitro T-Maxx.

Right here is a excellent thing that many others have purchased the same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Height: 2 3/4"
Density: 1/4"
Width at base: 2 3/4"
Width at top: 2"

CONSISTS OF:
(1) Front shock tower for the Traxxas Stampede

Regularly gotten with the thing that you are currently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and right steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

Right here is a excellent thing that many others have purchased the same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel building (silver color)

CONSISTS OF:
2 (2) turnbuckles

REQUIRES:
Rod ends (TRAC4742)

SPECIFICATIONS:
Length: 82.4mm
Size: 3mm

You will certainly enjoy this thing if you have the thing earlier stated.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are used on the rear end of the truck(rear hubs).

Suches as: 2- 62mm turnbuckles with adjusting nuts.