Traxxas Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls use in the LS II race truck kit.

Kit includes: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

Often purchased with the item that you are presently checking out.

46Mm Turnbuckles

These are replacement 36mm turnbuckles for Traxxas trucks.

Includes: 2- 36mm threaded turnbuckles w/nut for simple change.
2- 2x6,2.5mm thick aluminum spacers

Comment: The spacers are for spacing the ball end far from the transmission
bulkhead.

You will like this item if you have the item just above discussed.



This is the Motor for the Latrax Rally Car from Traxxas.

FEATURES:
Stock replacement motor

INCLUDES:
28 turn 370 size Brushed Motor

This item is regularly purchased with the above discussed item.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with connectors

NEEDS:
Setting up in vehicle

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Suching as Shaft: 3.2" (81mm)
Length Not Suching as Shaft: 2.3" (57.5mm)
Specifications such as RPM are not supplied

You will like this item if you have the item just above discussed.

Caster Blocks 30 Deg

This is a set of optional caster obstructs for the TRAXXAS TRX-3 2wd electrical off
roadway racing buggy.

FEATURES:
Made from white nylon
For 30° caster

INCLUDES:
One left caster block
One right caster block

REMARKS:
These castor obstructs install onto the front A-arms and the steering
blocks install onto the caster obstructs.

Here is one more item that compliments the item being reviewed.

Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends connect to turnbuckles for front/rear.

FEATURES:
Black nylon rod ends
Steel pivot balls

INCLUDES:
6 nylon rod ends
6 pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECS:
Length: .695" (17.6mm)
Inner Size: .217" (5.5mm)

REMARKS:
Will work only for the Nitro T-Maxx.

Here is a excellent item that lots of others have actually purchased the same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Density: 1/4"
Width at base: 2 3/4"
Width at top: 2"

INCLUDES:
(1) Front shock tower for the Traxxas Stampede

Often purchased with the item that you are presently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

INCLUDES:
One left and right steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Here is a excellent item that lots of others have actually purchased the same time.

82Mm Turnbuckles (2)

These are the Steering Turnbuckles for the Nitro Stampede.

FEATURES:
Steel building (silver color)

INCLUDES:
Two (2) turnbuckles

NEEDS:
Rod ends (TRAC4742)

SPECS:
Length: 82.4mm
Size: 3mm

You will like this item if you have the item just above discussed.

Turnbuckles 62Mm (2)

This is the replacement 62mm turnbuckles that come stock with the Traxxas
Nitro Hawk. These are used on the rear end of the truck(rear hubs).

Includes: 2- 62mm turnbuckles with adjusting nuts.