Traxxas Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic building and construction
Black in color
Metal Pivot Balls

CONSISTS OF:
12 Rod Ends
12 Pivot Balls

REQUIRES:
Assembly to automobile

SPECIFICATIONS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Regularly gotten with the product that you are presently checking out.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a set of replacement Toe Hyperlinks for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm diameter

CONSISTS OF:
2 front or rear toe links

REQUIRES:
Nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

Want another excellent product to compliment the above stated product?

Turnbuckles Toe Links Rr 5Mm (

These are the Rear Turnbuckles/Toe Hyperlinks for the Traxxas 3.3 T-Maxx, TRAC78**.

FUNCTIONS:
Constructed of steel, polished natural surface

CONSISTS OF:
2 Rear Turnbuckles/Toe Hyperlinks for the Traxxas 3.3 T-Maxx.

REQUIRES:
Installing in between wheel centers and rear bulkheads

SPECIFICATIONS:
Length: 4.9" (125mm)
Size: 0.20" (5mm)

REMARKS:
Fits only the 3.3 variation of the T-Maxx.

Want another excellent product to compliment the above stated product?

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Bumper
One Bumper Mount
2 3x25mm Button Cap Screws
2 4x10mm Button Cap Screws

REQUIRES:
Setup on the automobile

Right here is a excellent product that numerous others have purchased the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a excellent product that numerous others have purchased the exact same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to automobile

SPECIFICATIONS:
Inner Size: 10mm
Outer Size: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one required).

This product is often gotten with the above stated product.

Rod Ends (12) / Hollow Balls (12) Jato

    These are the Rod Ends and Balls for the Traxxas Jato.

FEATURES:
Black nylon construction.
Steel hollow balls.

INCLUDES:
Twelve rod end/balls

REQUIRES:
Installing on Jato

SPECIFICATIONS:
Length: 1-1/8" (28mm)
Width: 3/8" (9mm)

The listed below product likewise sets really well with the product being talked about.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and guideline
    sheet

REQUIRES:
Setup on the automobile

This product is often gotten with the above stated product.



This is a optional Racers Edge Aluminum single arm servo horn, planned for use with Futaba servos. This strong aluminum servo horn is similar in design to the Racers Edge Pro Adjustable servo horns, but includes a third linkage installing point and does not use lock down screws.