Traxxas Rod Ends Revo Large W/ Hollow Balls

This is the Large Rod End Set for the Traxxas Revo.

FEATURES:
Plastic construction
Black in color
Metal Pivot Balls

CONSISTS OF:
12 Rod Ends
12 Pivot Balls

NEEDS:
Assembly to vehicle

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Frequently acquired with the product that you are currently checking out.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a set of replacement Toe Hyperlinks for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm diameter

CONSISTS OF:
2 front or rear toe links

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

Want an additional great product to compliment the above pointed out product?

Turnbuckles Toe Links Rr 5Mm (

These are the Rear Turnbuckles/Toe Hyperlinks for the Traxxas 3.3 T-Maxx, TRAC78**.

FUNCTIONS:
Constructed of steel, sleek natural surface

CONSISTS OF:
2 Rear Turnbuckles/Toe Hyperlinks for the Traxxas 3.3 T-Maxx.

NEEDS:
Installing in between wheel hubs and rear bulkheads

SPECS:
Length: 4.9" (125mm)
Diameter: 0.20" (5mm)

REMARKS:
Fits just the 3.3 variation of the T-Maxx.

Want an additional great product to compliment the above pointed out product?

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon construction
Black in color

CONSISTS OF:
One Front Bumper
One Bumper Mount
2 3x25mm Button Cap Screws
2 4x10mm Button Cap Screws

NEEDS:
Setup on the vehicle

Right here is a great product that numerous others have purchased the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a great product that numerous others have purchased the very same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

NEEDS:
Assembly to vehicle

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one required).

This product is frequently acquired with the above pointed out product.

Rod Ends (12) / Hollow Balls (12) Jato

    These are the Rod Ends and Balls for the Traxxas Jato.

FEATURES:
Black nylon construction.
Steel hollow balls.

INCLUDES:
Twelve rod end/balls

NEEDS:
Installing on Jato

SPECS:
Length: 1-1/8" (28mm)
Width: 3/8" (9mm)

The listed below product likewise sets actually well with the product being discussed.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Setup on the vehicle

This product is frequently acquired with the above pointed out product.



This is a optional Racers Edge Aluminum single arm servo horn, intended for usage with Futaba servos. This strong aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, however features a 3rd linkage installing point and does not utilize lock down screws.