Traxxas Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic building
Black in color
Metal Pivot Balls

INCLUDES:
12 Rod Ends
12 Pivot Balls

REQUIRES:
Assembly to car

SPECS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Often gotten with the item that you are presently reading about.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a pair of replacement Toe Hyperlinks for the Traxxas Revo Truck.
    These adjust the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm diameter

INCLUDES:
Two front or rear toe links

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

Want an additional wonderful item to compliment the above pointed out item?

Turnbuckles Toe Links Rr 5Mm (

These are the Rear Turnbuckles/Toe Hyperlinks for the Traxxas 3.3 T-Maxx, TRAC78**.

FUNCTIONS:
Constructed of steel, polished natural surface

INCLUDES:
Two Rear Turnbuckles/Toe Hyperlinks for the Traxxas 3.3 T-Maxx.

REQUIRES:
Installing in between wheel hubs and rear bulkheads

SPECS:
Length: 4.9" (125mm)
Size: 0.20" (5mm)

COMMENTS:
Fits only the 3.3 version of the T-Maxx.

Want an additional wonderful item to compliment the above pointed out item?

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon building
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

REQUIRES:
Installation on the car

Below is a wonderful item that numerous others have purchased the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a wonderful item that numerous others have purchased the very same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to car

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

This item is often gotten with the above pointed out item.

Rod Ends (12) / Hollow Balls (12) Jato

    These are the Rod Ends and Balls for the Traxxas Jato.

FEATURES:
Black nylon construction.
Steel hollow balls.

INCLUDES:
Twelve rod end/balls

REQUIRES:
Installing on Jato

SPECS:
Length: 1-1/8" (28mm)
Width: 3/8" (9mm)

The listed below item also sets really well with the item being reviewed.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

REQUIRES:
Installation on the car

This item is often gotten with the above pointed out item.



This is a optional Racers Edge Aluminum single arm servo horn, planned for usage with Futaba servos. This strong aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, but includes a third linkage mounting point and does not use lock down screws.