Traxxas Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic building and construction
Black in color
Metal Pivot Balls

INCLUDES:
12 Rod Ends
12 Pivot Balls

NEEDS:
Assembly to car

SPECIFICATIONS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Regularly gotten with the product that you are currently reading about.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a pair of replacement Toe Links for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm size

INCLUDES:
Two front or rear toe links

NEEDS:
Nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

Want another excellent product to enhance the above mentioned product?

Turnbuckles Toe Links Rr 5Mm (

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx, TRAC78**.

FUNCTIONS:
Constructed of steel, refined natural surface

INCLUDES:
Two Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx.

NEEDS:
Setting up between wheel hubs and rear bulkheads

SPECIFICATIONS:
Length: 4.9" (125mm)
Diameter: 0.20" (5mm)

REMARKS:
Fits only the 3.3 version of the T-Maxx.

Want another excellent product to enhance the above mentioned product?

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon building and construction
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

NEEDS:
Installation on the car

Below is a excellent product that lots of others have purchased the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a excellent product that lots of others have purchased the same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).

This product is often gotten with the above mentioned product.

Rod Ends (12) / Hollow Balls (12) Jato

    These are the Rod Ends and Balls for the Traxxas Jato.

FEATURES:
Black nylon construction.
Steel hollow balls.

INCLUDES:
Twelve rod end/balls

NEEDS:
Setting up on Jato

SPECIFICATIONS:
Length: 1-1/8" (28mm)
Width: 3/8" (9mm)

The below product also sets really well with the product being reviewed.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Installation on the car

This product is often gotten with the above mentioned product.



This is a optional Racers Edge Aluminum single arm servo horn, planned for use with Futaba servos. This sturdy aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, but features a third linkage installing point and does not utilize lock down screws.